Special Feature Modes - Oce 3122 Manual

Special Feature Modes

This section describes the special feature modes that are displayed in the Special Features screen.
TWO-PAGE SEPARATION (See p. 4-4.)
This mode enables you to continuously copy bound originals such as books onto separate copy
sheets in one step.
TRANSP. INTERLVING (See p. 4-6.)
This mode enables you to automatically insert a copy sheet between transparencies.
OVERLAY (See p. 4-9.)
This mode enables you to superimpose two original images onto a single copy sheet.
DIF. SIZE ORIGINAL (See p. 4-14.)
This mode enables you to feed different-size originals (e.g. A4 and A3) together in one group in the
ADF/RDF, provided that the leading edge of each page is the same length.
THIN SHEET ORIGINAL (See p. 4-16.)
This mode enables you to make copies of faint originals such as invoices placed in the ADF.
SHIFT (See p. 4-18.)
This mode enables you to make copies with the entire image shifted.
MARGIN (See p. 4-22.)
This mode enables you to make copies with the entire original image shifted by a designated width
(0 to 20 mm) to the left, right, top or bottom to create a margin on copy sheets.
FRAME ERASE (See p. 4-26.)
This mode enables you to eliminate dark border areas and lines that appear around original images,
or shadows from punched holes.
IMAGE COMB. (See p. 4-33.)
This mode automatically reduces two or four originals to fit on one side or both sides of a selected
copy paper size.
IMAGE SEPARATION (See p. 4-38.)
This mode enables you to divide an original into equal sections and copy each section enlarged on
selected copy paper size.
4-2
Océ 3121 – Copying Manual – English