Oce 3122 Manual page 193

3 Release the Fresnel lens.
Press the Fresnel lens release lever to release the
Fresnel lens. When the 4 x 5 film holder is being
used, remove the holder from underneath the
Fresnel lens.
NOTICE
To prevent damage to the Fresnel lens, make sure that it is has
been released.
4 Lower the lamp source.
Press the lamp housing release key on the right side
of the projector until you hear it click. The light
housing is now released and the lamp housing will
automatically lower to the storage position.
5 Unplug the power cord.
Unplug the power cord from the power outlet and the
power cord connector.
Remove the Film Projector.
6
Remove the Film Projector by lifting it up holding the
two handles on its left and right sides.
Proceed to make copies in the usual way.
Océ 3121 – Copying Manual – English
1
2
3
4
5
6
7
8
9
10
7-5