Reducing Two Or Four Originals To Fit On A Single Copy Sheet (Image Comb.) - Oce 3122 Manual

Reducing Two or Four Originals to Fit on a
Single Copy Sheet
This mode automatically reduces two or four originals to fit on one side or both sides of a selected
copy paper size.
NOTICE
You cannot copy the front and back of two-sided originals in the Image Combination mode.
Originals copied in the Image Combination mode must all be the same size. You cannot use the Image
Combination mode with the Different Size Original mode.
In the Image Combination mode, combined use of Two-sided, Two-page Separation, Transparency
Interleaving, Overlay, and Image Separation modes cannot be set.
The following three Image Combination features are available.
MEMO
The reduction ratio is automatically set so that both originals fit in the selected copy paper size.
2 ON 1 (See p. 4-35.)
NOTICE
This feature can be used with the following combinations of model and options.
Horizontally placed originals
Original Placement
Series Name
Océ 3121
Vertically placed originals
Original Placement
Series Name
Océ 3121
Reduces two originals to fit on one side of a single copy sheet.
When vertically placed originals are copied to a horizontal layout, the two originals are reproduced
side-by-side in the copy.
When horizontally placed originals are copied to a vertical layout, the 1st original is reproduced
above the 2nd.
Océ 3121 – Copying Manual – English
(IMAGE COMB.)
Where to place the original
Platen glass ADF
No No
Where to place the original
Platen glass ADF
Yes No
Original Copy
2 ON 1
(horizontal
layout)
Original Copy
2 ON 1
(vertical
layout)
1
2
3
4
RDF
Yes
5
RDF
6
Yes
7
8
9
10
4-33