4
Turn the power ON.
Turn the power switch on the front of the Film
Projector to the "I" position.
5
Close the Fresnel lens.
Press the protrusion to the right on the operator's side of the slightly raised Fresnel lens
until you hear it click into place.
6
Insert the ND filter attachment.
How to Disconnect the Film Projector
Follow the procedure below to remove the Film Projector when it is not being used.
1
Turn the power OFF.
Turn the power switch on the front of the Film
Projector to the "O" position.
2
Remove the carrier.
Remove the 35 mm positive film carrier or 4 x 5
negative film carrier from the Film Projector.
7-4
Océ 3121 – Copying Manual – English