Erasing A Copy Job - Oce 3122 Manual

Erasing a Copy Job

You can erase a copy setting stored to a memory key.
1 Press the [MODE MEMORY] key.
MEMO
For details on operations to carry out from placing the
original until the Special Features screen is displayed,
see "Calling up the Special Features Screen," on p. 4-3.
2 Press the [STORE/ERASE] key.
3 Select the [ERASE] key.
Select the desired memory key whose copy job is to
4
be erased.
CAUTION
Check the copy settings before you erase them.
MEMO
If you have selected a memory key to which a copy job is stored,
its settings are displayed.
If there are more stored copy jobs than currently displayed, you
can scroll using the [ ] or [ ] keys.
6-8
Océ 3121 – Copying Manual – English