Self-Diagnostic (Error) Displays - Oce 3122 Manual

Self-diagnostic (Error) Displays

Self-diagnostic (error) messages appear in the touch panel display at the following times:
When copying cannot be performed because of an operational error.
When you need to make a judgement or take some action during copying.
If a self-diagnostic message appears, follow the instructions in the touch panel display.
Message/Cause
[Load A4-size paper.]
A paper drawer loaded with the most appropriate
paper size is not inserted in the machine.
[ Return pg.1 to the top and press the Start key.]
Copying was stopped due to a problem with the
RDF.
[ Remove paper from the sorter and press the
Start key again.]
Copies from the previous copy job remain in the
Sorter.
[ Attach the sorter to the copier.]
The sorter is not correctly attached to the
machine.
9-2
Océ 3121 – Copying Manual – English
Remedy
Load the indicated paper size in a paper drawer.
If you press the key while this message
appears, copying will be performed with the
currently selected paper size.
Arrange the originals in page order with the first
page on top. Place the originals back in the RDF
original supply tray, then press the
Remove the copies from all of the bins, then press
the key.
Firmly push the Sorter up to the machine until it
clicks into place.
key.