Calculating The Copy Ratio Based On The Original And Copy Paper Sizes (Zoom Program) - Oce 3122 Manual

Calculating the Copy Ratio Based on the Original and Copy Paper
Sizes
(ZOOM PROGRAM)
If you enter measurements for the original and desired copy images (or sheets), the machine will
automatically calculate and set the appropriate copy ratio. The following two Zoom Programme modes
are available.
Making copies with the same XY copy ratio (ZOOM)
Designate the same copy ratio for the vertical and horizontal directions.
Making copies with a different XY copy ratio (XY ZOOM)
Designate a different copy ratio for the vertical and horizontal directions.
X=100 mm
MEMO
Sizes designated in millimeters are converted to the copy ratio (%) as follows:
copy ratio (%) = copy size (mm)/original size (mm) x 100
Numbers past the decimal point are discarded.
If the calculated copy ratio is smaller than 25%, it is set to 25%. If it is larger than 800%, it is set to 800%.
NOTICE
When the calculated copy ratio is outside the 50 to 200% range, copies cannot be made from originals placed on
the ADF.
3-20
Océ 3121 – Copying Manual – English
Original
X=100 mm
Original
Original size
Copy
Copy paper size
Copy
Y=140 mm
X=80 mm