Making Copies With Margins On Top Or Bottom - Oce 3122 Manual

Making Copies with Margins on Top or Bottom

Place your originals.
For instructions on how to place an original on the platen glass, see p. 2-13.
For instructions on how to place originals in the ADF, see p. 2-14.
For instructions on how to place originals in the RDF, see p. 2-16.
1 Press the [MARGIN] key.
2 Select the [TOP MARGIN] or [BOTTOM MARGIN] ,
then press the [OK] key.
Set the margin width (1 to 20 mm), then press the
3
[OK] key.
Use the Number keys or the [–] [+] keys to set the width of
the margin.
· Press the [+] key to increase the size of the margin.
· Press the [–] key to decrease the size of the margin.
MEMO
If you press the [inch] key, you can set the margin width in
inches in the range of 1/16" to 3/4" with the [–] [+] keys.
4 Press the [DONE] key.
The display returns to the Basic Features screen.
4-24
Océ 3121 – Copying Manual – English