Oce 3122 Manual page 196

2 Select the [35 mm NEG] key.
MEMO
When the previous projector settings are still available, the [SKIP
SHADING] key is displayed. If you press the [SKIP SHADING]
key, scanning for internally adjusting the Film Projector is
omitted.
3 Slide the film to be copied into the 35 mm negative
film carrier.
4 Insert the negative film carrier into the projector.
NOTICE
Be sure to use the 35 mm negative film carrier supplied with the
Film Projector.
The letter "R" is written on the right side of the film carrier. Use
this mark as a reference when checking that the film is inserted
the right way up and is facing the correct direction.
Set the film so that the carrier windows are aligned with the film
frames.
7-8
Océ 3121 – Copying Manual – English