Oce 3122 Manual page 50

Stopping before copying is completed
· To stop the machine before copying is
completed, press the
MEMO
After you have pressed the
output from the machine.
To interrupt a continuous copying job
· To interrupt a continuous copying job when you
need to make priority copies, press the
(See "Interrupting Copying," on p. 2-22.)
9 When all copies have been made, press the
at the top right of the touch panel display.
MEMO
This step is not required if you have not set Department ID
Management.
10 Remove the control card.
MEMO
This step is not required if the optional Control Card V is not
attached.
2-4
Océ 3121 – Copying Manual – English
key.
key, several copies may be
key.
key