Changing the Current Standard Settings
(STANDARD SETTINGS)
"Standard settings" refers to a combination of copy modes that the machine is set to after the power is
turned ON or when the
Standard settings can be returned to their initial settings (defaults).
MEMO
The Standard mode initial settings (defaults) are as follows:
Copy quantity
Paper selection
Exposure/Image quality
To change the Standard settings, copy settings must already have been stored as the
Standard settings.
1
Press the [ ] or [ ] keys to display Custom Copy
Settings screen 3/3, and press the [STANDARD
SETTINGS] key.
2
Select the [STORE] or [INITIALIZE] key.
When storing the Standard settings
See "Storing the Standard Settings," on p. 8-13.
When initialising the Standard settings
See "Initialising the Standard Settings," on p. 8-14.
8-12
Océ 3121 – Copying Manual – English
key is pressed. This section describes how to change the Standard settings.
: 1
: Automatic
: A