1
Press the [PAPER SELECT] key.
MEMO
Auto Paper Selection is the Standard mode setting.
2
Select the [AUTO] key.
The screen on the right appears.
Proceed to make copies in the usual way.
(See chapter 2, "Basic Copying".)
MEMO
When using Auto Paper Selection, the selected paper size is indicated as follows:
· If you place your original on the platen glass, the paper size appears in the touch panel display after the
platen cover is lowered.
· If you place your originals in the ADF, the paper size appears in the touch panel display after you place the
original in the Original Supply Tray.
· If you place your originals in the RDF, the paper size appears in the touch panel display after you press the
key.
You can also cancel the mode by pressing the
Océ 3121 – Copying Manual – English
key. (The machine returns to the Standard mode.)
1
2
3
4
5
6
7
8
9
10
3-3