Reducing/Enlarging Originals To The Desired Size (Zoom Mode); Reducing Originals At A Desired Copy Ratio (Zoom); Zoom - Oce 3122 Manual

Reducing/Enlarging Originals to the Desired Size
(ZOOM MODE)
You can make copies reduced or enlarged to the desired copy ratio. The following six zoom modes are
available.
ZOOM (See p. 3-14.)
You can enlarge or reduce images by a copy ratio of your choice, selectable in 1% increments.
AUTO ZOOM (See p. 3-16.)
You can automatically copy from a standard-size original to a different standard-size copy at the
same XY ratio.
ENTIRE IMAGE (See p. 3-19.)
This mode slightly reduces the entire image.
This mode prevents images that fill the entire page from being cut off at the edges if it fills the entire
page.
ZOOM PROGRAM (See p. 3-20.)
You can make copies with a copy ratio, by specifying the copy size and original size.
Two Zoom Programme modes are available: [ZOOM] for specifying copying at the same XY copy
ratio, and [XY ZOOM] for specifying copying at a different XY copy ratio.
XY ZOOM (See p. 3-23.)
This mode makes enlarged or reduced copies at a different XY copy ratio.
Two XY Zoom modes are available: automatic for automatically specifying the copy ratio, and
manual for manually specifying the copy ratio.
MULTI-PG ENLARGE (See p. 3-27.)
This mode automatically calculates how many sheets the original is to be copied on based on the
enlarged copy size. If you paste together the copy sheets output in the Multi-PG Enlarge mode, you
can enlarge originals to copy paper sizes larger than A3.

Reducing Originals at a Desired Copy Ratio (ZOOM)

You can reduce or enlarge images by any copy ratio, selectable in 1% increments. The copy ratios are
as follows:
When placing originals in the RDF or on the platen glass:
When placing originals in the ADF:
NOTICE
When the selected copy ratio is outside of the 50 to 200% range, copies cannot be made from originals placed on
the ADF.
Place your originals.
For instructions on how to place an original on the platen glass, see p. 2-13.
For instructions on how to place originals in the ADF, see p. 2-14.
For instructions on how to place originals in the RDF, see p. 2-16.
3-14
Océ 3121 – Copying Manual – English
Original Copy
25 to 800%
50 to 200%