Using The Stack Bypass - Oce 3122 Manual

Using the Stack Bypass

To make copies on transparencies or special (thick) copy stock, use the stack bypass. Copies will be
made not on paper fed from the paper drawers but on paper in the stack bypass automatically fed into
the machine.
If you select the Stack Bypass mode with Auto Paper Selection, you can make copies from the stack
bypass. The following three types of paper can be copied using the stack bypass.
Standard Size
You can select standard inch system copy paper, or A or B series copy paper.
Free Size
You can place standard-size or non-standard size copy paper.
Envelope
You can place envelopes (COM10, Monarch, DL, ISO-B5, ISO-C5 and YOUKEI 4).
MEMO
When copying the following originals, you cannot use Auto Paper Selection:
· Highly transparent originals such as transparencies
· Originals with an extremely dark background
Use Manual Paper Selection with these types of paper.
When the Transparency Interleaving mode is already set, you cannot make copies using the stack bypass by Free
Size. When the Transparency Interleaving mode is selected when making copies by Free Size, enter the copy size
during copying.
Two-sided and Overlay modes cannot be set for envelopes.
NOTICE
Free Size and Envelope cannot be discharged and sorted to Multi-output Tray-C1 and -B2.
Note the following points when using the stack bypass.
· Copy quantity:
· Paper size:
· Paper weight:
· Curl down copy paper before use.
· There are some types of copy stock which may meet the above specifications but cannot be fed in the stack
bypass.
MEMO
When [STACK BYPASS SIZE ENTRY] in the Custom Copy Settings is set to [ON] (See p. 3-15 in the Reference
Manual .) and the stack bypass in [DRAWER ELIBILITY FOR APS / ADS] is set to [OFF] (See p. 3-11 in the
Reference Manual .), the Size Entry selection screen appears when you place copy paper in the stack bypass.
Once you have set a copy paper size, that setting is held in memory until you next place copy paper in the stack
bypass.
Place your originals.
For instructions on how to place an original on the platen glass, see p. 2-13.
For instructions on how to place originals in the ADF, see p. 2-14.
For instructions on how to place originals in the RDF, see p. 2-16.
Océ 3121 – Copying Manual – English
1 to about 50 sheets (stack about 5 mm high)
A3 size to postcard (horizontaly placed)
2 2
64 g/m to 128 g/m
1
2
3
4
5
6
7
8
9
10
3-5