Oce 3122 Manual page 39

When the RDF is attached (2/2)
[PROJECTOR]
Press to make copies from
photographic film.
(See "PROJECTOR," on p. 7-6.)
Press to store or recall copy jobs.
This mode enables you to store up to
five often used copy jobs in mode
(See "MODE MEMORY," on p. 6-3.)
Press to recall the previously set copy job.
(See "RECALL," on p. 6-11.)
Océ 3121 – Copying Manual – English
[MODE MEMORY]
memory.
[REC.]
[SHIFT]
Press to select or cancel the Shift mode. This mode
enables you to shift the position of the original image
on the copy sheet. Two modes are available: shifting
the original image to a fixed position or shifting the
original mode to a position designated using the
Number keys.
(See "SHIFT," on p. 4-16.)
[MARGIN]
Press to select or cancel the Margin
mode. This mode enables you to
create margins along the sides of
originals.
(See "MARGIN," on p. 4-22.)
[FRAME ERASE]
Press to select or cancel the Frame
Erase mode. This mode enables
you to eliminate dark border areas
and lines that appear around
original images, or shadows from
punched holes.
(See "FRAME ERASE," on p. 4-24.)
[IMAGE COMB.]
Press to select or cancel the Image
Combination mode. This mode
enables you to automatically reduce
two or four originals to fit on a
single copy sheet.
(See "IMAGE COMB.," on p. 4-31.)
[IMAGE SEPARATION]
Press to select or cancel the Image
Separation mode. This mode enables you
to divide an original into equal sections and
copy each section on one or two sides of a
copy sheet of a specified size.
(See "IMAGE SEPARATION," on p. 4-36.)
1
2
3
4
5
6
7
8
9
10
1-5