Oce 3122 Manual page 171

1 Press the [IMAGE CREATION] key.
MEMO
For details on operations to carry out from placing the original
until the Special Features Screen is displayed, see "Calling up
the Special Features screen," on p. 4-3.
When making a mirror image of the entire original, you need not
designate the area.
2 Select the [MIRROR IMAGE] key.
3 Select the mirror image type.
To make copies of a designated area:
Press the [AREA DESIG.] key. Proceed to step 4.
To make copies without designating an area:
Proceed to step 7.
4 Designate the area to be image processed by the
[X1], [Y1], [X2] and [Y2] keys, enter each of the
values using the Number keys, then press the [OK]
key.
MEMO
If you make a mistake when entering values, press the
and enter the values again.
Océ 3121 – Copying Manual – English
key,
1
2
3
4
5
6
7
8
9
10
5-13