Oce 3122 Manual page 70

6 When you finish copying, the touch panel display
changes as shown on the right.
To continue making copies in the Interrupt mode,
press the [YES] key. To end making copies in the
Interrupt mode, press the [NO] key.
When you press the [NO] key, the Interrupt mode is
cancelled.
You can also cancel the Interrupt mode by
pressing the
NOTICE
When you have finished making copies in the Interrupt mode, be
sure to cancel the Interrupt mode.
Printing by the FAX or printer is not possible while the machine
is in the Interrupt mode.
Copies cannot be made in the regular mode unless the Interrupt
mode is cancelled.
The Interrupt mode will not be cancelled even by pressing the
key.
7 Lift the platen cover (or ADF or RDF), and remove
the original from the platen glass.
8 Lift the platen cover (or ADF or RDF).
If the interrupted copy job was being run using the
platen glass, place the original (that you removed in
step 2) back on the platen glass.
If the interrupted copy job was being run using the
RDF, rearrange your originals in page order with the
first page on top. Then place your originals in the
original supply tray again.
If the interrupted copy job was being run using the
ADF, rearrange your originals in page order with the
first page at the bottom. Then place your originals in
the document tray.
2-24
Océ 3121 – Copying Manual – English
key.