Oce 3122 Manual page 7

Copying Manual
This document provides information which is new or has changed compared
with the Océ 3121 manual.
Common remarks
The Fax Monitor key is always displayed in the Basic Features screen for
copying.
When using the Stack Bypass, press the [Paper Select] key and then the
[Stack Bypass] key.
The Film Projector is not available with the Océ 3122.
Page 3-27, Notice and 3-29, step 3:
change to [Copy Ratio(s)], cancel the Multi-page Enlarge mode using the
Reset key and then change the specification.
Page 3-35, Memo:
originals, the back of the last page is left blank. (The machine's counter does
not count the blank page as a copy).
Page 3-37, step 4 and page 4-11, step 3:
platen glass the following messages appear on the touch panel display:
"Copying the 2nd side..."
Place the 2nd original and press the Start key again.
"Copying the 1st side..."
Page 3-45, Memo in step 2:
You can staple copies manually after they have been sorted, by using the
Manual Staple Mode.
If you are going to perform manual stapling for sorted copies of originals
placed on the platen glass, before copying turn Face Down Output "Off" and
then start copying from the last page.
Page 4-19, Memo in step 3:
direction of the selected arrow.
Page 4-36, step 3:
When the RDF is attached: Select either [2 on 1], [4 on 1] or [2 on
1/Two-sided], then press the [Ok] key.
Océ 3122 Copy
To cancel [Number of Output PGS] and
If the ADF or RDF is used and there are an odd number of
The image will shift in the exact opposite
If you place your original on the