Making Copies With Original Images Repeated In The Vertical Direction (Image Repeat) - Oce 3122 Manual

2 Select the [NEGA/POSI] key, then press the [DONE]
key.
MEMO
You can also make copies by pressing the
screen on the right displayed.
3 Press the [DONE] key.
The display returns to the Basic Features screen.
Proceed to make copies in the usual way.
(See chapter 2, "Basic Copying".)
MEMO
To cancel the settings, press the [SPECIAL FEATURES], [IMAGE CREATION], [NEGA/POSI] and [C] keys in
that order.
You can also cancel the mode by pressing the
Making Copies with Original Images Repeated in the Vertical Direction
(IMAGE REPEAT)
The Image Repeat feature allows you to make copies of a designated area in the original image
repeated in the vertical direction as shown below. The number of repeats can be set either
automatically or manually.
Automatic setting
The original image is copied so that the
maximum possible number of copies fit in the
selected copy paper size.
Original
NOTICE
In the Image Repeat mode, combined use of the Image Combination and Image Separation modes cannot be set.
Océ 3121 – Copying Manual – English
key with the
key. (The machine returns to the Standard mode.)
Copy
Entire
original
Designated
area only
Manual setting
The original image is copied for the specified
number of times.
Original Copy
Entire image
Designated
area only
1
2
3
4
5
6
7
Example:
When "3 times"
is specified
8
* Images are
copied clipped
9
10
5-9