Enlarging/Reducing Originals At Copy Ratios Set Independently For X And Y; Axes (Xy Zoom) - Oce 3122 Manual

Enlarging/Reducing Originals at Copy Ratios Set Independently for X
and Y Axes
(XY ZOOM)
If you set the XY Zoom mode, you can make enlarged or reduced copies at a different XY copy ratio.
The following two XY Zoom modes are available.
Manually Specifying the Copy Ratio (XY ZOOM) (See p. 3-24.)
Manually specify the XY copy ratio in 1% increments.
Original
Automatically Specifying the Copy Ratio (AUTO XY ZOOM) (See p. 3-25.)
The XY copy ratio is automatically set to suit the size of the selected copy paper.
Original
NOTICE
You cannot use the Auto XY Zoom mode with Auto Paper Selection.
If you set the Auto XY Zoom mode, select the copy paper size by Manual Paper Selection. If you do not select the
copy paper size, the copy ratio is automatically set to the size of the copy paper set in the topmost paper drawer
during copying.
You cannot copy highly transparent originals, such as transparencies, in the Auto XY Zoom mode. Use the
Reduction, Enlargement or Zoom modes.
When the copy ratio is outside the 50 to 200% range in the Auto XY Zoom mode, copies cannot be made from
originals placed on the ADF.
MEMO
When the copy ratio is smaller than 25% in the Auto XY Zoom mode, it is set to 25%. If it is larger than 800%, it is
set to 800%.
If an error occurs between the Auto XY Zoom copy ratio and the actual copy size, you can adjust this with the
Zoom Fine Adjustment function. (See "Zoom Fine Adjustment," on p. 3-38 in the Reference Manual .)
Océ 3121 – Copying Manual – English
Enlarging and reducing at
different XY copy ratios
A4R selected
A4
Copy
Y=80%
X=120%
Copy
A4R
1
2
3
4
5
6
7
8
9
10
3-23