Oce 3122 Manual page 150

1 Press the [FRAME ERASE] key.
2 Select the [BINDING ERASE] key, then press the
[OK] key.
3 Set the frame erase width (1 to 20 mm), then press
the [OK] key.
Use the Number keys or the [–] [+] keys to set the
frame erase width.
· Press the [+] key to increase the width of the frame.
· Press the [–] key to decrease the width of the frame.
MEMO
The default setting for the frame erase width is 12 mm.
4
Press the [DONE] key.
The display returns to the Basic Features screen.
Proceed to make copies in the usual way.
(See chapter 2, "Basic Copying".)
MEMO
To cancel the settings, press the [SPECIAL FEATURES], [FRAME ERASE], and [C] keys in that order.
You can also cancel the mode by pressing the
4-32
Océ 3121 – Copying Manual – English
key. (The machine returns to the Standard mode.)