Copy Special Originals And Originals Of A Non-Standard Size - Oce 2090 User Manual

Copy special originals and originals of a non-standard size

Introduction
Task for operators
Special originals can cause problems in the automatic document feeder. Use
the glass plate to copy special originals. When you use the glass plate, you
must use the Set-build key
Special originals are the following.
Pages from a bound original like a book or a magazine
Damaged or curled originals
Originals of a non-standard size.
When the original is put on the glass plate, the sheet size and the orientation of
the original are not automatically detected. The Océ VarioPrint 2090 uses a
number of rules to calculate the size and the orientation. These rules are the
following.
The sheet size of the original and the default sheet size of the print are the
same, standard sizes.
The default sheet orientation is a vertical orientation.
The zoom value for the print is 'Automatic' .
For example, the default size of the paper in the paper trays is A4 paper. The
Océ VarioPrint 2090 then calculates that the original on the glass plate is an
A4 original with portrait orientation.
To copy an original of a non-standard size and orientation, you must manually
set the sheet orientation to vertical (portrait) or horizontal (landscape).
Make sure that the original fits in the following ranges.
The minimum size for the short edge is 10 mm. The maximum size for the
short edge is 297 mm.
The minimum size for the long edge is 10 mm. The maximum size for the
long edge is 432 mm.
You can not use the 'Automatic' setting for zoom to copy an original of a
non-standard size and orientation to a different size. Then you must adjust the
zoom setting by hand.
108 Océ VarioPrint 2090 User manual
to make 2-sided copies.