First Time Installation And Configuration; Workstation Requirements - Polycom 1500 Deployment Manual

First Time Installation and
Configuration
The product names, Polycom
and RMX
Do not insert a USB device into the RealPresence® Collaboration Server's USB port unless it is
your intention to disable Secured Mode or perform a Comprehensive Restore to Factory Defaults.

Workstation Requirements

The RMX Web Client and RMX Manager applications can be installed in an environment that
meets the following requirements:
•
•
•
•
•
.Net Framework 2.0 is required and installed automatically.
The RMX must be installed on the intranet or added to the trusted sites list. In both cases, the
ActiveX control will install properly.
Management of the RMX using the RMX Web Client requires the installation of ActiveX. In
deployments were ActiveX is prohibited, administrators must use the RMX Manger.
For users deploying a RMX Serial Gateway S4GW, the VIEW_RVGW_ACTIVEX System Flag can
be added and its value modified to determine if ActiveX controls are used to display the RMX Serial
Gateway S4GW web site. If the flag value is set to NO (default) an external Internet Explorer
browser is launched to display the RMX Serial Gateway S4GW web site.
For more information see the RealPresence® Collaboration Server Administrator's Guide, "ActiveX
Bypass" on page 21-68.
Polycom, Inc.
®
®
1500, 2000, 4000 are used interchangeably throughout this document.
Minimum Hardware – Intel® Pentium® III, 1 GHz or higher,
1024 MB RAM, 500 MB free disk space.
Workstation Operating System – Microsoft® Windows® XP, Vista®.
Network Card – 10/100 Mbps.
Web Browser – Microsoft® Internet Explorer® Version 7 or higher.
FIPS – Is always enabled in Ultra Secure Mode, and when ClickOnce is used to install
RMX Manager, the workstation must have one of the following installed:
— .NET Framework 3.5 or a later version of the .NET Framework.
— .NET Framework 2.0 plus Service Pack 1 or later.
®
RealPresence Collaboration Server 1500, 2000, 4000
1
1-1