First Time Installation And Configuration; Preparations; Gather Network Equipment And Address Information; Ip Services - Polycom RealPresence Getting Started Manual

First Time Installation and
Configuration
First Time Installation and Configuration of the RealPresence Collaboration Server 800s Virtual
Edition consists of the following procedures:

Preparations

1
Hardware
Installation
and
Setup
2
First Entry
Power-up and
Configuration
3
Preparations

Gather Network Equipment and Address Information

IP Services

The IP addresses and network parameters which enable communication between the
Preparations Polycom® RealPresence Collaboration Server 800s, its management application and the
conferencing devices are organized in two IP services:
•
•
Hardware
During the First Entry Configuration, the parameters of these two network services are
Installation
and Setup
modified to comply with your local network settings.
First Entry
Power-up and
Configuration
Polycom, Inc.
Preparations:
— Gather Network Equipment and Address Information - get the information needed
for integrating the RealPresence Collaboration Server 800s into the local network.
— Unpack the Polycom® RealPresence Collaboration Server 800s.
— Modify the Management Network parameters on the USB memory stick.
Hardware Installation and Setup
— Mount the Collaboration Server in a rack.
— Connect the necessary cables.
First Entry Power-up and Configuration
— Power up the RealPresence Collaboration Server 800s.
— Register the RealPresence Collaboration Server 800s.
— Connect to the RealPresence Collaboration Server 800s.
— Configure the Default IP Network Service.
Management Network (Control Unit)
Default IP Service (Conferencing Service which includes the signaling and media)
2
2-1