Device Information; Contents - Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual

Device Information

Revised: May, 2011, OL-21845-01

Contents

This chapter contains the following sections:
•
•
•
•
•
Accessing the Device Information Window
The Device Information window is the first thing you see when you log on to the Cisco TelePresence
System Administration interface. It is from this window that you can access configuration,
troubleshooting, and monitoring tasks for the Cisco TelePresence System (CTS) as well as view
information about the devices installed on your system.
Before You Begin
To access the Cisco TelePresence System Administration interface for the first time, complete the steps
in Logging into the Cisco Unified CM Administrator section of
Configuration Guide for the Cisco TelePresence
To view information about the Cisco TelePresence devices on your system:
Step 1 Log in to the Cisco TelePresence System Administration interface by completing the following steps:
a.
Note If you need to obtain the IP address, do the following:
1.
OL-21845-01
Accessing the Device Information Window, page 2-1
Device Information Fields, page 2-3
Hardware/Software Versions, page 2-5
System Information and Status Tabs, page 2-5
Where to Go Next, page 2-12
Open an Internet Explorer browser window and type in the IP address of the system in the URL field
and click Enter. The Cisco TelePresence Administration Login Screen appears, as shown in
Figure 2-1.
On the IP phone, locate "Manual" at the bottom of the screen and press the Manual soft key.
C H A P T E R
Cisco Unified Communications Manager
System.
Cisco TelePresence System Administration Guide
2
2-1