Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual page 80

Managing CTS 500 Hardware Setup
Figure 4-3
Click Show Camera Target. A red
Step 5
Figure 4-4
Prepare the large camera target and place it on the easel.
Step 6
Set the easel and large target in the position that the user will occupy. Use the distance measured from
Step 7
the camera to the head of the user to position the target. If the distance is unknown, use 1.5 meters
(5 feet).
Note The user must be at least 4 feet (1.2 meters) away from the display for all CTS 500 installations.
Figure 4-5
installations.
Cisco TelePresence System Administration Guide
4-8
Cameras Screen
+
Show Camera Target
shows a pedestal stand-mounted CTS 500. Use the same method for all types of CTS 500
appears on the test screen, as shown in
Chapter 4 Troubleshooting the CTS 500
Figure 4-4.
OL-21845-01