Upgrading Cts Codec Firmware - Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual

Upgrading CTS Codec Firmware

Upgrading CTS Codec Firmware
Upgrades should only be performed at night or during minimal Cisco TelePresence usage times. An
Note
upgrade takes about 2 hours to complete.
The procedure to upgrade CTS firmware is the same as the firmware upgrade procedure for the
Cisco Unified CM IP phones. See the Uploading Files to the Cisco Unified CM TFTP Directory section
of the
for complete instructions.
To download CTS firmware:
Log into the
Step 1
The Tools & Resources Download Software appears.
Expand the Cisco TelePresence System folder and open the Cisco TelePresence System sub folder. A
Step 2
list of CTS devices appears.
Select your CTS device
Step 3
Upload the firmware file to the TFTP directory of your Cisco Unified CM TFTP server.
Step 4
Restart the TFTP server.
Step 5
Step 6 Change the firmware filename for the system(s) that you want to upgrade (either via the Device Defaults
page, or on a per system basis) in the Cisco Unified CM Administration interface.
Click the Restart button in Cisco Unified CM for the device(s) that you want to upgrade.
Step 7
Cisco TelePresence System Administration Guide
3-24
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Download Software Select a Product
http://www.cisco.com/cisco/software/navigator.html
Chapter 3 Configuring the Cisco TelePresence System
page on Cisco.com:
OL-21845-01