Testing Microphones On The Cts 3200 - Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual

Managing CTS 3000 and CTS 3200 Hardware Setup
Step 8 Click Stop to end the test.

Testing Microphones on the CTS 3200

To test microphones on the CTS 3200:
Step 1 Log in to the Cisco TelePresence System Administration interface.
Step 2 Choose Troubleshooting > Hardware Setup.
Step 3 Click the Microphones radio button.
Step 4 Click Start in the Testing box to begin the test.
Step 5 Lightly tap each microphone and watch the audio meter on the corresponding display screen to see that
sound registers.
Step 6 Click Refresh Microphones Status to update the connection status of all microphones.
Note If you have a Cisco TelePresence 3200, there are six microphones for the second row table. In a reduced
configuration, the second row table has just four microphones, and a yellow question mark will appear
in the test screen where the two end microphones would be in the full configuration.
Cisco TelePresence System Administration Guide
9-18
Chapter 9 Troubleshooting the CTS 3000 and CTS 3200
OL-21845-01