Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual page 64

System Settings
Table 3-5
Field
Quality Configuration
Overall System Quality
Locale Configuration
Time Zone
Language
Cisco TelePresence System Configuration
System Type
Days Display Not Active
Cisco TelePresence System Administration Guide
3-20
System Settings (continued)
Description or Setting
This field displays the system bandwidth and screen resolution. The
bandwidth is the maximum negotiated video bandwidth for a CTS call. A
higher bandwidth increases video quality.
Choose from the following:
• Highest Detail, Best Motion: 4Mbps 1080p (default)
• Highest Detail, Better Motion: 3.5Mbps, 1080p
• Highest Detail, Good Motion: 3Mbps, 1080p
• High Detail, Best Motion: 3Mbps, 720p
• High Detail, Better Motion: 2Mbps, 720p
High Detail, Good Motion: 1Mbps, 720p
•
High Detail, Limited Motion: 720p (Lite)
•
Displays the configured time zone for your area of the world from the
drop-down menu.
Displays the configured language for CTS.
Identifies the CTS model. Choose from the following:
• Cisco TelePresence 500
• Cisco TelePresence 1000
Cisco TelePresence 1100
•
Cisco TelePresence 1300
•
Cisco TelePresence 3000
•
Cisco TelePresence 3010
•
Cisco TelePresence 3200
•
Cisco TelePresence 3210
•
You must select the CTS device type specifically to upgrade your
Note
CTS software.
For information about the CTS 500 32", see
CTS 500 32".
Specifies the days of the week that the Cisco TelePresence system display
remains off by default. Choose Monday through Sunday. Default is
Sunday and Saturday.
Chapter 3 Configuring the Cisco TelePresence System
Troubleshooting the
OL-21845-01