Chapter 10
Troubleshooting the CTS 3010 and CTS 3210
Figure 10-1
Troubleshooting Window
CTS initial setup is also performed using the Hardware Setup fields. For information on how to configure
CTS for the first time, see the following documentation:
•
•
Managing Displays
A display is set up successfully when the color on the display has been adjusted for the lighting in the
meeting room.
Each display must be adjusted individually.
Note
Use the information in the following sections to adjust the display for your system:
•
•
•
•
OL-21845-01
Cisco TelePresence System 3010 Assembly, Use & Care, and Field Replacement Unit Guide
Cisco TelePresence System 3210 Assembly, Use & Care, and Field Replacement Unit Guide
Selecting the Light Level, page 10-4
Adjusting Your Display, page 10-5
Troubleshooting Displays, page 10-6
Related Information, page 10-6
Managing CTS 3010 and CTS 3210 Hardware Setup
Cisco TelePresence System Administration Guide
10-3