Chapter 9
Troubleshooting the CTS 3000 and CTS 3200
Figure 9-1
you with troubleshooting tasks.
Figure 9-1
Troubleshooting Window
CTS initial setup is also performed using the Hardware Setup fields. For information on how to configure
CTS for the first time, see the following documentation:
•
•
Managing Displays
A display is set up successfully when the color on the display has been adjusted for the lighting in the
meeting room.
Each display must be adjusted individually.
Note
Use the information in the following sections to adjust the display for your system:
•
•
•
•
OL-21845-01
shows an example of the Cisco TelePresence System administration tools available to assist
Cisco TelePresence System 3000 Assembly, Use & Care, and Field Replacement Unit Guide
Cisco TelePresence System 3200 Assembly, Use & Care, and Field Replacement Unit Guide
Selecting the Light Level, page 9-4
Adjusting Your Display, page 9-5
Troubleshooting Displays, page 9-6
Related Information, page 9-6
Managing CTS 3000 and CTS 3200 Hardware Setup
Cisco TelePresence System Administration Guide
9-3