Managing CTS 1300 Hardware Setup
You must specify the table shape before you can perform camera and microphone testing on the
Note
CTS 1300.
The table must be a minimum of 7 feet wide and 9 feet long.
Figure 8-2
Note
If you log out of the Cisco TelePresence System Administration interface at any time during the camera
testing procedure, you must re-select the table type.
See the following sections to configure your table type:
•
Configuring the CTS 1300 for Use With a Long Straight Table, Wide Rectangular Table, or Long
Racetrack table, page
•
Configuring the CTS 1300 for Use With a Short Racetrack Table, page
Cisco TelePresence System Administration Guide
8-4
Cisco CTS 1300 Table Configuration Menu
8-13.
Chapter 8
Troubleshooting the CTS 1300
8-33.
OL-21845-01