System Settings - Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual

Chapter 3 Configuring the Cisco TelePresence System

System Settings

The System Settings window displays read-only information about the system settings for the
Cisco TelePresence System that were set in Cisco Unified CM configuration.
To view system settings:
Step 1 Choose Configuration > System Settings. The System Settings window appears, as shown in
Figure
Figure 3-12 CTS System Settings
Step 2 View the system settings information described in
Table 3-5
Field
Username/Password Configuration
User ID
New Password
New Password (verify)
OL-21845-01
3-12.
System Settings
Description or Setting
Displays username and password.
Note
Table 3-5.
Usernames and passwords must be at least 4 characters, but not
more than 64 characters in length, and can contain upper and lower
case alphanumeric characters and the underscore and dash
characters. The following usernames are not allowed: apache,
daemon, nobody, operator, and shutdown.
Cisco TelePresence System Administration Guide
System Settings
3-19