Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual page 60

Telephony Settings
Table 3-3
Field
DSCP For Audio
DSCP For Video
Start Media Port
End Media Port
Step 3 Use Cisco Unified CM to make changes to Telephony Settings. See the
Manager Configuration Guide for the Cisco TelePresence
Cisco TelePresence System Administration Guide
3-16
Telephony Settings (continued)
Settings
Displays the traffic queuing techniques that define per-hop behavior
based on the Differentiated Services Code Point (DSCP) value in the
IP header of a packet. The following DSCP settings apply for both
audio and video traffic:
• AF11 DSCP (001010)
• AF12 DSCP (001100)
• AF13 DSCP (001110)
• AF21 DSCP (010010)
AF22 DSCP (010100)
•
AF23 DSCP (010110)
•
AF31 DSCP (011010)
•
AF32 DSCP (011100)
•
AF33 DSCP (011110)
•
AF41 DSCP (100010)—Recommended value
•
• AF42 DSCP (100100)
• AF43 DSCP (100110)
• CS1 (precedence 1) DSCP (001000)
• CS2 (precedence 2) DSCP (010000)
• CS3 (precedence 3) DSCP (011000)
• CS4 (precedence 4) DSCP (100000)
• CS5 (precedence 5) DSCP (101000)
CS6 (precedence 6) DSCP (110000)
•
CS7 (precedence 7) DSCP (111000)
•
Default DSCP (000000)
•
EF DSCP (101110)
•
Must be in the range from 16384 to 32766, and must be lower than
the End Media Port settings.
Must be in the range from 16384 to 32766, and must be higher than
the Start Media Port settings.
Chapter 3 Configuring the Cisco TelePresence System
Cisco Unified Communications
System.
OL-21845-01