Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual page 342

Managing CTS 3010 and CTS 3210 Hardware Setup
Figure 10-3
Step 2 Attach the large target to the underside of the center table section by placing the round pads on the
underside of the clamps into recesses that are drilled under the table.
You can feel under the table to find the small round recesses.
Tip
Cisco TelePresence System Administration Guide
10-8
Camera Target Assembly
Chapter 10 Troubleshooting the CTS 3010 and CTS 3210
5
4
6
6
6
OL-21845-01