Restoring Connectivity To The Codec - Cisco CTS 1000 - TelePresence System 1000 Video Conferencing Administration Manual

Managing Passwords
Step 3 The system will ask whether you want to continue. Type Y then return to continue
Note
This system will now prepare for password reset and prompt you for a passcode. The new passcode is
displayed on the CTS main display, as shown in the following example:
Note The passcode is a randomly generated number and will be different for each login attempt. If you enter
the wrong passcode, the system will inform you that the passcode was incorrect and will exit, as shown
in the following example. If this happens, repeat
Example 3-2
Do you want to continue ? (y/n):y
Preparing the system...
Please enter the passcode:12345
Sorry that was an invalid passcode...
Logging off
Connection to 10.00.00.100 closed.
dhcp-249:~ $
When you enter the correct passcode, the CTS will then reset the administration account name and
password to the system defaults. The following example shows successful password reset information:
Example 3-3
Please enter the passcode:507530
resetting admin name and password
stopping any existing admin session
admin account and password reset to default
success in applying security rules
Logging off
Connection to 10.00.00.100 closed.
dhcp-249:~ $
If you are using the CTS with a Cisco Unified Communications Manager, the next time you perform a
Note
"Refresh" or "Reset" from the Cisco Unified CM, the administration account name and password will
be reconfigured to the values specified in the Cisco Unified CM device page.

Restoring Connectivity to the Codec

If you lose connectivity to the codec, refer to the Cisco TelePresence System Assembly, Use & Care, and
Field-Replaceable Unit Guide for your system on Cisco.com:
•
Cisco TelePresence System Administration Guide
3-26
If desired, type any other key then return to exit.
Password reset is now being run
Passcode: 919175
Invalid Password Reset Request
Successful Password Reset Request
Product Support > TelePresence > TelePresence Immersive Endpoints
Chapter 3 Configuring the Cisco TelePresence System
Step 1 and Step 2.
OL-21845-01