Usb Status; Xstatus Usb Device [N] State; Xstatus Usb Device [N] Type; Userinterface Status - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

USB status

xStatus USB Device [n] State

Shows the USB device state.
Value space of the result returned:
Empty/Unsupported/Supported
Example:
xStatus USB Device 1 State
*s USB Device 1 State: Supported
** end

xStatus USB Device [n] Type

Shows the USB device type.
Value space of the result returned:
Ethernet/Unknown/None
Example:
xStatus USB Device 1 Type
*s USB Device 1 Type: Ethernet
** end
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration xCommand

UserInterface status

xStatus UserInterface

Shows the top level overview of the video status.

xStatus UserInterface ContactInfo ContactMethod [n] Number

Returns the system's active contact information. This address is used to reach this endpoint.
Value space of the result returned:
String
Example:
xStatus UserInterface ContactInfo ContactMethod Number
*s UserInterface ContactInfo ContactMethod 1 Number: "12345678"
** end

xStatus UserInterface ContactInfo Name

Returns the system's active contact name. The result depends on which protocol, if any, the
system is registered on. The automatically set contact name may have been overridden with the
command xConfiguration UserInterface ContactInfo Type. This results in a diagnostics warning
about contact mismatch.
Value space of the result returned:
String
Example:
xStatus UserInterface ContactInfo Name
*s UserInterface ContactInfo Name: "MySystem"
** end

xStatus UserInterface Extensions Widget [n] WidgetId

Returns the unique identifier for a widget in the touch controller user interface.
167
API Reference Guide
xStatus xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.