Audio Settings; Audio Defaultvolume; Audio Input Microphonemode; Audio Microphones Mute Enabled - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction
Software version: CE9.14 Product: DX80 and DX70

Audio settings

Audio DefaultVolume

Define the default volume for the speakers. The volume is set to this value when you switch
on or restart the video conferencing device. Use the controls on the user interface to
change the volume while it is running. You may also use API commands (xCommand Audio
Volume) to change the volume while the device is running, and to reset to default value.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: 50
Value space: Integer (0..100)
Range: Select a value between 1 and 100. This corresponds to the dB range from -34.5
dB to 15 dB, in steps of 0.5 dB. If set to 0 the audio is switched off.

Audio Input MicrophoneMode

This setting applies only to DX80.
The DX80 has microphones in both legs. If the microphone mode is Focused, the
microphones can be combined to focus sound sensitivity. As a result, the noise in the room
is suppressed, and you can be heard better when sitting right in front of the device. The
voice of people not sitting right in front of the device will be suppressed.
If the microphone mode is Wide, the device behaves like any other device. The voice of
people sitting beside you will be heard, and also more noise from the room.
We recommend that you use Focused mode when you are the only speaker. Use Wide
mode when several speakers are in front of the device.
Requires user role: ADMIN, INTEGRATOR
Default value: Wide
Value space: Focused/Wide
Focused: Focused sound sensitivity, suppressing sound from sources that are not right
in front of the device.
Wide: Default microphone operation with normal sound sensitivity.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance

Audio Microphones Mute Enabled

Define the microphone mute behavior on the device.
Requires user role: ADMIN, INTEGRATOR
Default value: True
Value space: True/InCallOnly
True: Muting of audio is always available. In general, the microphone mute LED will not
be lit outside of call, but you can still mute using the API commands.
InCallOnly: Muting of audio is only available when the device is in a call. When Idle, it is
not possible to mute the microphone. This is useful when an external telephone service/
audio system is connected via the device and is to be available when the device is not
in a call. When set to InCallOnly this will prevent the audio-system from being muted by
mistake.

Audio SoundsAndAlerts RingTone

Define which ringtone to use for incoming calls.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: Sunrise
Value space: Sunrise/Mischief/Ripples/Reflections/Vibes/Delight/Evolve/Playful/Ascent/
Calculation/Mellow/Ringer
Select a ringtone from the list.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
84
Administrator Guide
Device settings Device settings Appendices