Audio Microphones Mute Enabled; Audio Output Arc [N] Delay Delayms; Audio Output Arc [N] Delay Mode; Audio Output Arc [N] Mode - Cisco Webex Room Panorama Administrator's Manual

Cisco Webex Room Panorama and Room 70 Panorama

Introduction

Audio Microphones Mute Enabled

Define the microphone mute behavior on the device.
Requires user role: ADMIN, INTEGRATOR
Default value: True
Value space: True/InCallOnly
True: Muting of audio is always available. In general, the microphone mute LED will not
be lit outside of call, but you can still mute using the API commands.
InCallOnly: Muting of audio is only available when the device is in a call. When Idle, it is
not possible to mute the microphone. This is useful when an external telephone service/
audio system is connected via the device and is to be available when the device is not
in a call. When set to InCallOnly this will prevent the audio-system from being muted by
mistake.

Audio Output ARC [n] Delay DelayMs

n: 1..1
To obtain lip-synchronization, you can configure each ARC output with an extra delay
that compensates for delay in other connected devices, for example TVs and external
loudspeakers. The delay that you set here is either fixed or relative to the delay measured
on or reported by an external monitor, as defined in the Audio Output ARC [n] Delay Mode
setting.
Requires user role: ADMIN, INTEGRATOR
Default value: 0
Value space: Integer (0..290)
The delay in milliseconds.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance

Audio Output ARC [n] Delay Mode

n: 1..1
You may add extra delay to an audio ARC output with the Audio Output ARC [n] Delay
DelayMs setting. The extra delay added is either a fixed number of milliseconds, or a
number of milliseconds relative to the detected delay on or reported by an external monitor.
Requires user role: ADMIN, INTEGRATOR
Default value: Fixed
Value space: Fixed/RelativeToHDMI
Fixed: Any extra delay (DelayMs) added to the output, will be a fixed number of
millisecond.
RelativeToHDMI: Any extra delay (DelayMs) added to the output, will be relative to the
detected delay on or reported by an external monitor. The actual delay is detected-delay
+ DelayMs. The Audio Output Connectors ARC [n] DelayMs status reports the actual
delay.

Audio Output ARC [n] Mode

n: 1..1
Choose whether or not to enable the audio return channel (ARC) on the HDMI [n] input
connector. The ARC output must be enabled if you want audio playback through the
camera.
The camera is a part of the integrated loudspeaker system. We recommend to leave the
ARC output enabled. If you want to disable the complete integrated loudspeaker system,
use the Audio Output InternalSpeaker Mode setting.
Requires user role: ADMIN, INTEGRATOR
Default value: On
Value space: Off/On
Off: Disable the ARC output on the HDMI input.
On: Enable the ARC output on the HDMI input.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
92
Administrator Guide
Device settings Device settings Appendices