Configuring Differentiated Services By Department - Dell Force10 S2410-01-10GE-24P Configuration Manual

The following information is repeated for each interface and direction (only those interfaces configured
with an attached policy are shown):
Intf (Interface)—Valid unit, slot and port number separated by forward slashes.
Oper Stat (Operational Status)—The current operational status of this DiffServ service interface.
Offered Packets—A count of the total number of packets offered to all class instances in this service before
their defined DiffServ treatment is applied. These are overall per-interface, per-direction counts.
Discarded Packets—A count of the total number of packets discarded for all class instances in this service for
any reason due to DiffServ treatment. These are overall per-interface per-direction counts.
Sent Packets—A count of the total number of packets forwarded for all class instances in this service after
their defined DiffServ treatments were applied. In this case, forwarding means the traffic stream was passed to
the next functional element in the data path, such as the switching or routing function or an outbound link
transmission element. These are overall per-interface per-direction counts.
Policy Name—The name of the policy attached to the interface.
Figure 12-149. show service-policy Command Example
Force10 #show service-policy in
Oper
Intf Stat
------- ---- -------------------------------
1/0/1 Up pm-1
1/0/2 Down pm-1
1/0/3 Down pm-1
<output deleted>
Force10 #

Configuring Differentiated Services by Department

The following example shows how a network administrator can provide equal access to the Internet (or
other external network) to different departments within a company. Each of four departments in this
example has its own VLAN, and each VLAN is to be allocated 25% of the available bandwidth on the port
accessing the Internet.
Policy
Name
Quality of Service | 191