Dell Force10 S2410-01-10GE-24P Configuration Manual page 206

Figure 13-167. Using the show interface-ethernet Command
Force10 #show interface ethernet 1/0/2
Type........................................... Normal
Admin Mode..................................... Enable
Physical Mode.................................. Auto
Physical Status................................ Down
Speed.......................................... 0 - None
Link Status.................................... Detach
MAC Address.................................... 0001.E8D5.A058
Total Packets Received (Octets)................ 0
Packets Received > 1522 Octets................. 0
Packets RX and TX 64 Octets.................... 0
Packets RX and TX 65-127 Octets................ 0
Packets RX and TX 128-255 Octets............... 0
Packets RX and TX 256-511 Octets............... 0
Packets RX and TX 512-1023 Octets.............. 0
Packets RX and TX 1024-1518 Octets............. 0
Packets RX and TX 1519-1522 Octets............. 0
Packets RX and TX 1523-2047 Octets............. 0
Packets RX and TX 2048-4095 Octets............. 0
Packets RX and TX 4096-9216 Octets............. 0
Total Packets Received Without Errors.......... 0
Unicast Packets Received....................... 0
Multicast Packets Received..................... 0
Broadcast Packets Received..................... 0
Total Packets Received with MAC Errors......... 0
Jabbers Received............................... 0
Fragments Received............................. 0
Undersize Received............................. 0
Alignment Errors............................... 0
FCS Errors..................................... 0
Overruns....................................... 0
Total Received Packets Not Forwarded........... 0
Local Traffic Frames........................... 0
802.3x Pause Frames Received................... 0
Unacceptable Frame Type........................ 0
Multicast Tree Viable Discards................. 0
storm control
Broadcast Storm Recovery....................... 0
CFI Discards................................... 0
Upstream Threshold............................. 0
!------------[output omitted]--------------!
206 | Access Control