Dell Force10 S2410-01-10GE-24P Configuration Manual page 228

Figure 14-190. Using show vlan Command to Display Native VLAN Members
Force10 #show vlan
Codes: * - Default VLAN, G - GVRP VLANs, E - Ethernet interface,
Vlan Id
-------
* 1
2
3
Figure 14-191. Using show interface Command to Display Native VLAN Membership
Force10 #show interface 1/0/1
Packets Received Without Error................. 8
Packets Received With Error.................... 0
Broadcast Packets Received..................... 0
Packets Transmitted Without Errors............. 0
Transmit Packet Errors......................... 0
Collision Frames............................... 0
Time Since Counters Last Cleared............... 0 day 0 hr 19 min 22 sec
Native Vlan.............................. 1
Figure 14-192. Using show interface ethernet Command to Display Native VLAN Membership and
Activity
Force10 #show interface ethernet 1/0/1
Type................. Normal
Admin Mode........... Disable
Physical Mode........ Auto
Physical Status...... Down
Speed................ 0 - None
Duplex............... N/A
Link Status.......... Down
MAC Address.......... 0001.E8D5.A0DA
Native Vlan.............................. 1
Total Packets Received (Octets)................ 512
Packets Received > 1522 Octets................. 0
Packets RX and TX 64 Octets.................... 8
Packets RX and TX 65-127 Octets................ 0
Packets RX and TX 128-255 Octets............... 0
!--output truncated--!
228 | VLANs
Status Q Ports
--------- - --------
Inactive U E ^1/0/1 , ^1/0/2
1/0/8 ,1/0/9 ,1/0/10,1/0/11,1/0/12,1/0/13,1/0/14
1/0/15,1/0/16,1/0/17,1/0/18,1/0/19,1/0/20,1/0/21
1/0/22,1/0/23,1/0/24,1/0/25,1/0/26,1/0/27,1/0/28
1/0/29,1/0/30,1/0/31,1/0/32,1/0/33,1/0/34,1/0/35
1/0/36,1/0/37,1/0/38,1/0/39,1/0/40,1/0/41,1/0/42
1/0/43,1/0/44,1/0/45,1/0/46,1/0/47,1/0/48,1/0/49
1/0/50
Inactive T E ^1/0/3
Inactive
^ - Native VLAN
,1/0/3 ,1/0/4 ,1/0/5 ,1/0/6 ,1/0/7