Displaying The System Log - Dell Force10 S2410-01-10GE-24P Configuration Manual

Command Syntax
Note: You can copy the System log from the switch to a TFTP server. See
Uploading Files on page 44

Displaying the System Log

As shown in Figure
configured in logging buffered
Figure 6-71. Using the show logging Command
Force10 #show logging ?
<cr>
<1-128>
history
hosts
traplogs
Force10 #show logging
Syslog Logging
CLI Command Logging
Console Logging
Buffered (In-Memory) Logging
Buffered Logging Wrapping Behavior : On
Logging Host List Empty
<189> JAN 01 00:00:58 0.0.0.0-1 TRAPMGR[190295576]: traputil.c(661) 67 %% Cold Start: Unit: 0
<190> JAN 01 00:00:38 0.0.0.0-1 UNKN[137768456]: sysapi.c(1707) 66 %% Building defaults for file
lldpCfgData.cfg version 1
<190> JAN 01 00:00:37 0.0.0.0-1 UNKN[213988280]: sysapi.c(1707) 65 %% Building defaults for file
qos_cos.cfg version 2
<190> JAN 01 00:00:37 0.0.0.0-1 UNKN[159744808]: sysapi.c(1707) 64 %% Building defaults for file
ipStaticArpCfg.cfg version 2
<190> JAN 01 00:00:37 0.0.0.0-1 UNKN[213988280]: sysapi.c(1707) 63 %% Building defaults for file
acl.cfg version 5
<189> JAN 01 17:03:45 192.168.11.50-1 TRAPMGR[194961512]: traputil.c(661) 273 %% Link Up: LAG- 2
<189> JAN 01 17:03:45 192.168.11.50-1 TRAPMGR[194961512]: traputil.c(661) 272 %% Link Down: LAG- 2
!---------output truncated-----------!
You also have the option of using the
SFTOS logging history table, which you configured, above, with the
Command Mode
in the Getting Started chapter.
6-71, execute the
show logging
, above:
Display buffered (in-memory) log entries.
Number of buffered log entries to be displayed.
Display the contents of syslog history table.
Display logging hosts.
Display Trap Records.
: enabled
: disabled
: level alert
: level informational, 67 Messages Logged
show logging history
Purpose
See Configuring Syslog Server Host Connections on page
(Optional) To display accurate times and dates in the log,
configure a connection to an SNTP server. See
System Date and Time Manually on page
command to see the System log messages that you
command to view system messages through the
logging history
107.
Setting the
78.
Downloading and
command.
System Logs | 103