Dell Force10 S2410-01-10GE-24P Configuration Manual page 188

Drop—Drop a packet upon arrival. This is useful for emulating access control list operation using DiffServ,
especially when DiffServ and ACL cannot co-exist on the same interface.
Exceed CoS—The action to be taken on excess packets per the policing metrics.
Exceed Secondary CoS—The action to be taken on excess packets conforming with the secondary class of
service value per the policing metrics.
Non-Conform CoS—The action to be taken on violating packets per the policing metric.
Non-Conform Secondary CoS—The action to be taken on violating packets conforming with the secondary
class of service per the policing metric.
Redirect—Forces a classified traffic stream to a specified egress port (physical or LAG). This can occur in
addition to any marking or policing action. It may also be specified along with a QoS queue assignment.
If a
policyname
Policy Name—The name of this policy
Type—The policy type, namely whether it is an inbound or outbound policy definition
The following information is repeated for each class associated with this policy (only those policy
attributes actually configured are displayed):
Class Name—The name of this class
Mark CoS—Denotes the class of service value that is set in the 802.1p header of outbound packets. This is not
displayed if the mark cos was not specified.
Mark IP DSCP—Denotes the mark/re-mark value used as the DSCP for traffic matching this class. This is not
displayed if policing is in use for the class under this policy.
Mark IP Precedence—Denotes the mark/re-mark value used as the IP Precedence for traffic matching this
class. This is not displayed if either mark DSCP or policing is in use for the class under this policy.
Policing Style—This field denotes the style of policing, if any, used (
Committed Rate (Kbps)—This field displays the committed rate used in simple policing.
Committed Burst Size (KB)—This field displays the committed burst size used in simple policing.
Conform Action—The current setting for the action taken on a packet considered to conform to the policing
parameters. This is not displayed if policing is not in use for the class under this policy.
Conform DSCP Value—This field shows the DSCP mark value if the conform action is markdscp.
Conform IP Precedence Value—This field shows the IP Precedence mark value if the conform action is
markprec.
Exceed Action—The current setting for the action taken on a packet considered to exceed to the policing
parameters. This is not displayed if policing not in use for the class under this policy.
Exceed DSCP Value—This field shows the DSCP mark value if this action is markdscp.
Exceed IP Precedence Value—This field shows the IP Precedence mark value if this action is markprec.
Non-Conform Action—The current setting for the action taken on a packet considered to not conform to the
policing parameters. This is not displayed if policing not in use for the class under this policy.
Non-Conform DSCP Value—This field displays the DSCP mark value if this action is markdscp.
188 | Quality of Service
is specified, the following fields are displayed:
police-simple , if any).