Dell Force10 S2410-01-10GE-24P Configuration Manual page 261

3. Specify the router ID and enable OSPF for the switch. Set disable 1583compatibility to prevent the
routing loop.
Force10 (Config)#router ospf
Force10 (Config router)#enable
Force10 (Config router)#router-id 192.130.1.1
Force10 (Config router)#no 1583compatibility
Force10 (Config router)#exit
Force10 (Config)#
4. Enable OSPF for the ports and set the OSPF priority and cost for the ports.
Force10 (Config)#interface 1/0/2
Force10 (Interface 1/0/2)#ip ospf
Force10 (Interface 1/0/2)#ip ospf areaid 0.0.0.2
Force10 (Interface 1/0/2)#ip ospf priority 128
Force10 (Interface 1/0/2)#ip ospf cost 32
Force10 (Interface 1/0/2)#exit
Force10 (Config)#interface 1/0/3
Force10 (Interface 1/0/3)#ip ospf
Force10 (Interface 1/0/3)#ip ospf areaid 0.0.0.3
Force10 (Interface 1/0/3)#ip ospf priority 255
Force10 (Interface 1/0/3)#ip ospf cost 64
Force10 (Interface 1/0/3)#exit
Force10 (Config)#interface 1/0/4
Force10 (Interface 1/0/4)#ip ospf
Force10 (Interface 1/0/4)#ip ospf areaid 0.0.0.2
Force10 (Interface 1/0/4)#ip ospf priority 255
Force10 (Interface 1/0/4)#ip ospf cost 64
Force10 (Interface 1/0/4)#exit
Force10 (Config)#exit
Force10 #exit
Layer 3 Routing | 261