Dell Force10 S2410-01-10GE-24P Configuration Manual page 189

Non-Conform IP Precedence Value—This field displays the IP Precedence mark value if this action is
markprec.
Bandwidth—This field displays the minimum amount of bandwidth reserved in either percent or
kilobits-per-second.
Expedite Burst Size (KBytes)—This field displays the maximum guaranteed amount of bandwidth reserved
in either percent or kilobits-per-second format.
Shaping Average—This field is displayed if average shaping is in use. Indicates whether average or peak rate
shaping is in use, along with the parameters used to form the traffic shaping criteria, such as CIR and PIR. This
is not displayed if shaping is not configured for the class under this policy.
Shape Committed Rate (Kbps)—This field is displayed if average or peak rate shaping is in use. It displays
the shaping committed rate in kilobits-per-second.
The following is sample output from
Figure 12-146. show policy-map Command Example
Force10 #show policy-map
Policy Name
------------------------------- ----------- -------------------------------
pm-1
Force10 #
If the policy name is not specified, as shown above, this command displays a list of all defined DiffServ
policies. The following fields are displayed:
Policy Name—The name of this policy
Note: The order in which the policies are displayed is not necessarily the same order in which
they were created.
Policy Type—The policy type, namely whether it is an inbound or outbound policy definition
Class Members—List of all class names associated with this policy
The following is sample output from
:
show policy-map
Policy Type Class Members
In cl-map-1
cl-map-2
show policy-map
policy-map-name
:
Quality of Service | 189