Avaya Communication Manager Administrator's Manual page 119

Note:
Page 2 of the
Note:
network region, and pages 4 through 19 are duplicates of page 3
providing the ability to administer up to 250 locations.
Figure 37: IP Network Region screen
change ip-network-region n
src dst
rgn rgn
3 1
3 2
3 3
3 4
3 5
3 6
3 7
3 8
3 9
3 10
3 11
3 12
3 13
3 14
3 15
The following connections are administered in this example:
codec-set 2 is used between region 1 and region 4
●
codec-set 5 is used between region 1 and region 99
●
codec-set 6 is used between region 1 and region 193.
●
Now you need to assign the region number to the CLAN circuit pack. All the endpoints
registered with a specific CLAN circuit pack belong to the CLAN's region. See Administration for
Network Connectivity for Avaya Communication Manager, 555-233-504, for more information.
Adding telephones to Remote Office
Be sure the extensions you add fit your dialing plan.
Instructions
1. Type add station nnnn, where nnnn is the extension you are adding. Press Enter.
The Station screen
IP Network Region screen
Inter Network Region Connection Management
codec direct
set WAN WAN-BW limits Intervening-regions
1 y 256:Kbits
1 n
1
1 n
1 n
1 y :NoLimit
1 y 10:Calls
appears.
Setting up Remote Office
shows a list of LSP servers for the
Dynamic CAC
1 ___ ___ ___
1 ___ ___ ___
6 ___ ___ ___
Issue 2.1 May 2006
(Figure 37),
Page 3 of x
Gateway IGAR
119