Avaya Communication Manager Administrator's Manual page 118

Managing Telephones
Instructions
Set up network region 1:
1. Type add ip-network-region 1. Press Enter.
The IP Network Region
Figure 36: IP Network Region screen
change ip-network-region n
Region: n
Location:
Name:
MEDIA PARAMETERS
Codec Set: 1
UDP Port Min: 2048
UDP Port Max: 3028
DIFFSERV/TOS PARAMETERS
Call Control PHB Value:
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 6
2. In the Name field, describe the region you are setting up.
3. In the Codec Set field, type the codec set you want to use in this region.
4. In the UDP Port Range field, type the range of the UDP port number to be used for audio
transport.
5. In the Intra-region IP-IP Direct Audio field, type y.
6. In the Inter-region IP-IP Direct Audio field, type y.
7. Move to page 3 to set up connections between regions and assign codecs for inter-region
connections.
118 Administrator Guide for Avaya Communication Manager
screen appears.
Home Domain:
Audio PHB Value:
Video PHB Value:
Audio 802.1p Priority: 6
Keep-Alive Count: 5
IP NETWORK REGION
Intra-region IP-IP Direct Audio: no
Inter-region IP-IP Direct Audio: no
IP Audio Hairpinning? y
RTCP Reporting Enabled? y
RTCP MONITOR SERVER PARAMETERS
Use Default Server Parameters? y
Server IP Address:
RTCP Report Period(secs): 5
AUDIO RESOURCE RESERVATION PARAMETERS
RSVP Refresh Rate(secs): 15
Retry upon RSVP Failure Enabled? y
RSVP Profile: guaranteed-service
RSVP unreserved (BBE) PHB Value: 40
Page 1 of x
. .
Server Port: 5005
RSVP Enabled? y
.