Dtmf Memory; Programming A Dtmf Code - Icom IC-V82 Instruction Manual

7

DTMF MEMORY

■ Programming a DTMF code

The transceiver has 16 DTMF memory channels (d0 to dF)
for storage of often-used DTMF codes of up to 24 digits.
qPush [A•
], then push [0•
FUNC
.
MODE
• Rotate [VOL] to select "dtm.OF," if necessary.
0
A
Push
FUNC
OPT
wPush [0•
] for 1 sec. to enter the DTMF memory.
OPT
• One of "d0" to "dF" appears.
0
Push for 1 sec.
OPT
eRotate [VOL] to select the desired channel.
rPush [0•
] for 1 sec. to enter the DTMF programming
OPT
mode.
• "_ _ _ _ _" appears.
• Programmed memories can be cleared in this way.
0
Push for 1 sec.
OPT
26
] to enter
OPTION SET
OPT
tPush the digit keys, [A•
FUNC
] and [✱• ] to enter the desired DTMF code.
[#•
BANK ENT
• A maximum of 24 digits can be input.
• [✱• ] enters as "E", [#•
ENT
• If a digit is mistakenly input, push [MONI] or [PTT] momentarily
then repeat from step q.
MONI
A B C
FUNC CALL MR
1 2 3
TONE P.BEEP T.SCAN
4 5 6
DUP SCAN SKIP
7 8 9
PRIO SET H/M/L
yPush [MONI] or [PTT] to fix the digits and exit the DTMF
programming mode.
• Programmed DTMF codes sound when [MONI] is pushed.
The DTMF memory consists of 5 pages that are 1st to 5th, 6 to
10th, 11 to 15th, 16 to 20th and 21st to 24th digits.
1st page indication 2nd page indication
4th page indication 5th page indication
Appears
], [B• ], [C• ], [D•
CALL MR CLR
] enters as "F."
BANK
PWR
D
CLR
BANK
0
OPT
ENT
3rd page indication
Appears
Blinks
],