Dsc Operation; I Mmsi Code Programming; I Dsc Individual Id - Icom IC-M502AW Instruction Manual

6

DSC OPERATION

I MMSI code programming

The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This function is not available when the MMSI code has
been programmed by the dealer. This code programming
can be performed only twice.
q Turn power OFF.
w While pushing
[
[
code programming condition.
e After the display appears, release
Set MMSI
ä23456789
r Edit the specific MMSI code by rotating
• Push [ [ ] or ]
CH/WX
CH/WX
ward, respectively.
t Input the 9 digit codes, then push
code.
• Returns to the normal operation.
14
] , turn power ON to enter MMSI
]
DSC/ENT DSC/ENT
[
[
DSC/ENT
DSC/ENT
[
[ CHANNEL
CHANNEL
[ [ ] to move the cursor forward or back- ]
SCAN
SCAN
[
[
DSC/ENT DSC/ENT

I DSC individual ID

A total of 40 DSC address IDs can be programmed and
named with up to 10 characters.
D D Programming Address ID/Group ID
q Push
[
[ DSC/ENT
DSC/ENT
w Rotate
[
[
DSC/ENT
DSC/ENT
] .
]
e Rotate
[
[
DSC/ENT DSC/ENT
] .
]
] to set the
]
] to enter the DSC menu.
]
[ ] to select "Set
[ ]
CHANNEL CHANNEL
] .
]
Sel Item
POS Report
DTRS Set
˘Set up
[ ] to select "Add
[ CHANNEL ]
CHANNEL
] .
]
Set up
˘Add ID
Delete ID
Offset Time
up," push
ID," push